How Do You Choose a Water-Based Acrylic Emulsion for Inks, Coatings, and Label Adhesives?

2026-11-18

What Is Water-Based Acrylic Emulsion Used For, and How Do You Choose a Grade?
A water-based acrylic emulsion is a dispersion of acrylic polymer particles in water. It is commonly used as a binder in water-based printing inks, paper coatings, textile coatings, and some pressure-sensitive label adhesives. As the formulation dries, the polymer forms a film. To choose a grade, start with the substrate, processing conditions, and finished-product tests, then compare specifications such as solids content and viscosity.
How the Application Changes the Selection Criteria
For water-based ink printed on PVC edge banding, alcohol wipe resistance may be a requirement. Print the ink on the actual PVC, dry it under the intended production conditions, and check both ink adhesion and resistance to alcohol wiping. For a textile coating, the trial may instead focus on how the fabric feels after coating and whether the coating cracks when flexed.
Application What to Check in a Trial
Water-based printing inks Adhesion and rub resistance on the actual substrate. Check alcohol wipe resistance where required.
Paper and paperboard coatings Wet rub resistance, sticking during stacking, and cracking at fold lines for folding cartons.
Textile coatings and binders Fabric hand, flexibility, and wash resistance where required.
Pressure-sensitive label adhesives Initial tack, peel strength, and holding power on the intended application surface.


Frequently Asked Questions
Can two acrylic emulsions with similar solids content be used interchangeably?
Compare them in the same formulation, on the same substrate, and under the same drying conditions. Grades with similar solids content and viscosity can differ in film hardness, flexibility, and adhesion.

Can an acrylic emulsion for water-based ink also be used for pigment grinding?
Check the intended use of the grade. Some emulsions are designed primarily for film formation and adhesion. For pigment grinding, confirm the supplier recommends that use and evaluate viscosity and storage stability after grinding.

If you are evaluating an acrylic binder for an ink, coating, or label adhesive, share your substrate, processing conditions, and target tests with Sinograce Chemical to discuss a grade for your trial.

Droit d\'auteur © 2015-2026 Anhui Sinograce Chemical Co., Ltd..Tous droits réservés.

top